top of page

Store Equipment

Graders

Graders

Click on photos to enlarge

Seed Grading Operation

Images and video shows a 36" wide seed grading operation with box tipping, hopper, feed elevator, seed sizer, roller inspection tables, bag fillers with weigh scales. Available after season (late April early May) as whole or may split. Click here to view the video of it in operation.

**Please note everything except the Seed Sizer/Grader has now been sold**

For more information call Steve on: 07850 871901

Click on photos to enlarge

Downs 72" Mobile Grader

Adjustable coils and split belt inspection table, picking stands and cross conveyor for smalls and rejects.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Grimme 1800 Grading Module

Comes with a selection of screens and the smalls conveyor. Not used now due to change in crop marketing agreement but hydraulic motors will be required for stern drives.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Haith 4ft Oversize Grader
​
4ft wide with rubber screen, varispeed motor and side belt for smalls. Located Mid Lincs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Haith 1200 4ft Mobile Grader

Hopper, coils, screen, with spare screens, roller table. Located close by Kinross, Fife.
 

For more information call Steve on: 07850 871901

Click on photos to enlarge

Haith 4ft (1200) Mobile Grader

In 2 halves. Each half is mobile with the hopper section consisting of a 4ft flat extension with vario speed belt being cleated to help the spud movement up to the star cleaner which has its own independently powered side belt. The next half of the machine starts  with the screen module, currently fitted with a rubber screen with undersize dropping through to side belt, again individually powered. Crop then passes onto the full width roller table where pickers have proper stands and waste is directed down to a reject conveyor. The whole machine is powered by 3 phase electrics. From my initial observations of these units in a static state, all belts are in good order, could be tracked to run more centrally and whilst the machine had some age it aslo, like myself has plenty of go left in it!! Located near Rugby, Warwickshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert 900 (3ft) Mobile Grader 
​
Doctored somewhat to have Dahlmans table fitted. No grading screen but 7 person inspection area with turning roller.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert 36" Mobile Grading Module

36" wide mobile grading module consisting of screen, roller inspection table. Screen has the side table and inspection area has stands and a reject side conveyor. Ideal machine to be fed with high level hopper or as used on this farm located under side table on main grader. Located near Rugby and superseded with a higher output system. All 3 phase electrics.

For more information call Steve on: 07850 871901

Click on photos to enlarge

3ft Screen Grading Module

3 phase electrics. Screen is 14ft 6" long. Side table for smalls has been removed and used elsewhere on the farm however the electric controls still remain for an alternative conveyor to be installed. Located near Hinckley, Leic. 

For more information call Steve on: 07850 871901

Click on photos to enlarge

2020 Tong 1800 Wide Grader

Located in Norfolk near Kings Lynn is this 2020 Tong 1800 wide grader. For sale as a result of the owner updating.
It consists of an intake hopper with height sensor and optional front board for forklift box tipping to feed. Crop then passes onto the infeed belt for the 6 rows.
Evolution/ EasyClean separation system with 8mm flutes. Thereafter 4 rows of manually adjustable spools aid the cleaning/sizing at this stage before the crop passes onto the inspection area with its flat belts and turning rollers. Thereafter sizing module follows with crop finally passing onto a freestanding crop cross conveyor. The whole machine is controlled from the one control  console which will detect which e m stop button might have been activated. 
Delivered from Tong into this shed it is exceptionally presentable and has been well maintained. A modern spec machine and a credit to the current operators. Click here to see a video of the grader operating.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 48" Caretaker Grader

Built in '97 for this customer for yard use hence the frame and canopy, it had always been used in shed as photographed. The specification included for an 8ft flat hopper extension allowing for trailer side tipping. Hopper belt is variable speed with crop dropping onto a web cleaning module for soil extraction with low level side belt under. The following grading module is an extended version using a slightly longer screen but ensuring better grading.

Particularly suited to seed grading. Inspection area is with turning rollers and a central trough for waste whereby waste is deposited down onto the side belt at the end of the inspection area. Picking stands and lights complete the Tong element of this mobile grader. All crop carrying sections are variable speed. A big machine that offers exceptional value for money because under the dust it can be seen to have been well maintained. Located Mid Lincs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 3B Bulker

This 36" wide Tong 3B bulker is in the process of being superseded by a newer unit. It will be available later in the spring when the new unit is commissioned and therefore can be seen working for any potential customer. Located in Cambs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

2005 Tong Grader

Removed from a permanent position in a shed on this South Lincs farm is this 2005 Tong grader. Principally acquired for simple seed/onion grading is how it was used until June 2025 when on-farm system was updated to give split grading capabilities. Generally dismantled and moved to its current position where it would benefit from a wash to remove some of the gathering greenery and the residual soil but otherwise a very tidy, well looked after bit of kit comprising of:
4ft wide belt in the hopper with its 8ft flat extension and front board, gives greater holding capacity when fed with tipper or front bucket. Belt is varispeed by 3 phase inverter in control box with control on the independent box which can be seen in the hopper. Crop is then passed onto a 3ft wide web cleaner with covered bars. After the web cleaner is the 3ft screen module with mechanical varispeed drive and independent varispeed agitation, long tuber handling device and a reversible side table for graded smalls. A separate roller table with its motor and subframe is part of the setup.
As can be seen, some electrical reconnections will need to be made but my observations indicate that all major components are present and the competitive price reflects an electricians input is required but mechanically it's in good order.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Peal 3ft Grading Module

Peal 3ft wide grading module with side belt for smalls and screens at 50mm, 45mm and 40mm. All 3 phase electrics.

For more information call Steve on: 07850 871901

Click on photos to enlarge

6ft Oversizer

Electronic varispeed drive (inverter). Options on screens sizes are available but the unit will be sold with one screen, others available separately.

For more information call Steve on: 07850 871901

Hoppers

Hoppers

Click on photos to enlarge

2 Tonne Bulk Hopper

On legs with 1 phase varispeed motor. Chain link for cleaning in bottom of hopper. This machine is nearly as old as Steve but like him it's in good working order!
Located near Liverpool.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Stainless Steel 2 Tonne Hopper

2 tonne hopper used in a small spud processing plant in Cheshire and now surplus has an electronic varispeed control. Whilst the machine looked in god working order the owner implied it would benefit from a new belt. However it was working when production ceased in December 23.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert Into Store Hopper

Herbert into store hopper cleaner with adjustable coils, mids web under and soil belt under that. Crop conveyor at end. All cross conveyors reversible. Hopper belt vari-speed along with adjustable gap on the coils. This machine has only ever had crop tipped in by forward tippler and is in very tidy, well maintained condition. Located near Rugby, Warwickshire where the farm has ceased spud growing.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert 6ft Wide Hopper

Located in Worcestershire with a long standing customer who has decided to cease spud growing. This 6ft wide mobile Herbert hopper with stars and coils along with appropriate conveyors as can been seen in the photo. It's old but good and straight. Used in 2025 for instore receiving from trailers and on into store. Definitel got loads of life init with good condition belts, stars and coils. Clearly has a good life thus far.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong Mobile Hopper Cleaner

3ft belt and web cleaner with side belt for waste. Located near Ormskirk.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Miedema In-Store Hopper

Miedema in-store hopper cleaner. Now surplus as spuds no longer stored on the farm. A significant reduction will see all crop sold off-field. Located in Cheshire.

For more information call Steve on: 07850 871901

Conveyors & Elevators

Conveyors, Elevators & Roller Tables

Click on photos to enlarge

Swift Lift 33ft Elevator

Swift Lift 33ft straight boom elevator with powered slewing (on a track) and powered wheel (for forward and reverse) 3 phase electrics, hydraulic power for boom lift and lower. Located in Cambridgeshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Swift Lift 9m x 600mm Dual Conveyors

Swift Lift 9 metre x 600 millimetres dual (piggyback) conveyors with two speed motors on each conveyor. Good belts but scabby paintwork. Located near Knutsford.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Fyson 15m Elevator

Fyson extending and slewing elevator. Here in South Lincs this machine has been replaced with a new item. All in working order it extends to 15 metres.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Miedema Dual Conveyors

Miedema dual (piggy-back) conveyors. Size on the sticker gives the info (120/70). Basic specification with good belts and ready to go. Located in Cambridgeshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

3 Phase Swan Neck Elevator

3 phase elevator suitable for soil/waste. Mobile machine with swan neck for extended reach. Good belt and flights. Located near Hinckley, Leic.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Swan Neck Elevator

3 phase electrics. Mobile unit with a good belt. Located in Cambridgeshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Waste Elevator

Waste elevator or other purpose, 3 phase electrics, on wheels, good flights and belt. Located near Hinckley, Leic.

For more information call Steve on: 07850 871901

Click on photos to enlarge

8ft Bag Elevator

8ft metres long, inclined bag elevator. Single phase electrics. Located near Gatwick Airport.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 9ft x 2ft Elevator

Tong 9ft long x 2ft wide elevator with 3 phase electrics and adjustable height legs with castors. Located near Rugby.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Miedema Single Belt Conveyor

3 phase electrics, mobile and good troughed belt. Located in Cambridgeshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert Conveyor
3 phase, 2ft wide

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert 30ft (9m) Dual Conveyors

30ft (9m) x 900mm wide dual conveyors were used for bulk storing onions. Manually adjustable feed off end and individually hydraulic adjustable at the feed on ends of both conveyors. 3 phase, 4 pin, 16 amp supply. Good condition troughed belts. Located in Kings Lynn.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert Feed Elevator

Used originally to feed a box filler but this 3 phase powered item is available now as a separate item. It is adjustable for feed off height. Located in Cambridgeshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert 10ft x 2ft Roller Flat Belt

Herbert 10ft x 2ft Roller flat belt with turning roller and 3 phase mechanical varispeed motor and 5 pin plug, inspection lamp over. Used for inspecting into store on this Cambs farm but spuds no longer grown so now surplus. Located near Wisbech, Cambs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Herbert 10ft x 2ft Roller Inspection Table

Herbert 10ft x 2ft roller inspection table with 3 phase (5 pin). Mechanical varispeed motor and inspection light over. Surplus to requirements as spuds not grown anymore. Located near Wisbech, Cambs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

20ft x 2ft Flighted Belt Conveyor

3 phase flighted belt used to receive spuds from the grader and elevate into a washer. No longer required on this Cheshire farm. The 6ft Miedema grader feeding has been sold but the 30 tonne/hour washer receiving the crop can be found in our washer section.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Amac 20ft (6m) Dual Conveyors

20ft (6m) each dual conveyors with 2ft (600mm) wide belts. 3 phase, 4 pin, 16 amp supply and adjustable height legs. A novel rear wheel steering arrangement. Old but good belts. Located near Kings Lynn.

For more information call Steve on: 07850 871901

Click on photos to enlarge

2ft x 12ft Flat Belt Conveyor

Adjustable legs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

22" x 13ft Flat Belt Conveyor

3 phase.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Nicholson 2' x 17' Flat Belt Conveyor
​
3 Phase

For more information call Steve on: 07850 871901

Click on photos to enlarge

24" x 20ft Flat Belt Conveyor
​
24" wide flat belt conveyor for inspection purposes at approx 20ft long. Has selection of 'dustbin' type picking chutes for waste to go down underneath conveyor and then onto the waste elevator at the end.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong Bag Lift Conveyor

Lifting up to waist height following your stitching line.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong Roller Inspection Table

4ft wide x 6ft long variable speed roller inspection table. Used for the final inspection after the washer.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 8ft x 2ft Roller Table

2ft wide x 8ft long roller table with 3 phase. Adjustable height legs. Located near Rugby, Warwickshire

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 8ft x 3ft Roller Table

8ft long x 3ft wide roller table with adjustable height legs, good chains and rollers. Surplus to requirements. Located in Cambridgeshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Peal 8ft x 3ft Roller Table

8ft long x 3ft wide roller table with 3 phase electrics. Located in Derbyshire. It's available due to reorganisation in the grading shed.

For more information call Steve on: 07850 871901

Box Fillers

Box Fillers & Tippers

Click on photos to enlarge

Miedema Box Filler

Hydraulic lift Miedema twin box filler with matching feed elevator. Located Warwickshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Haith Supafill Box Filler

3 phase electrics. Currently being checked over for correct operation and ready for sale. Located at our workshop in South Lincolnshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Downs Boxer

Downs Boxer, hydraulic lift platforms with matching feed elevator. Located in Cambridgshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Downs 2002 Hydraulic Lift Twin Head Box Filler

Hydraulic lift twin head box filler with matching feed elevator. Elevator has vari-speed drive motor and adjustable legs with castor wheels. Downs unit has protective guard rails and motion /intrusive sensors across front for additional personnel safety. This machine has recently been removed from service on this South Lincs farm due to a change in grading/storing procedures.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Reekie Farnwood Twin Box Tippler

Reekie Farnwood twin box tippler with delivery side conveyor. Just completing grading out '25 crop and then available from near Haddington in the Borders. Price yet to be discussed.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong Mini Easy Fill Box Filler

Currently in use to end of grading out '25 crop and then available as spud production ceased on this farm near Haddington in the Borders.

For more information call Steve on: 07850 871901

Click on photos to enlarge

2 x Tong Big Bag Bin Filling Hoppers

To be sold after completion of grading '25 crop. Located near Haddington in the Borders where spud production has ceased.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Peal Box Tipper

Peal, corner pivot, floor mounted box tipper with 3 phase electro-hydraulics. Better photos to be available when the machine is moved out of shed and cleaned down. Located in Somerset and no longer required.

For more information call Steve on: 07850 871901

Weighers & Baggers

Weighers & Baggers

Click on photos to enlarge

Tong 825 Weigher

 

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 825 Weigher

Single phase weigher, nearly new belts. Located in South Lincs.

 

For more information call Steve on: 07850 871901

Click on photos to enlarge

Walthambury 320 Weigher

3 phase.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Walthambury 320 Weigher

Walthambury 320 Tank Weigher requiring 3 phase electrics and an air supply. A new machine has replaced this older unit. Located in Lancashire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Walthambury 425 Bagger

Walthambury 425 bagger with good belts, al in working order with bag drop kit mated to a wood slat 10ft long conveyor with bag presenter and fixed head stitcher. Located in South Lincs

For more information call Steve on: 07850 871901

Click on photos to enlarge

Walthambury 425 Series 2000 Weigher

Walthambury 425 Series 2000 weigher with 3 phase electrics. Kept by the owner, unused for a few years. Just in case he decided to grow a few, that didn't happen so now it's time to stop looking at it!! In recent years I had the grading shed full of equipment and sold it away. For anyone in the Southwest this may be an opportunity because it is located at Penzance near to Sainsbury's and the new Heliport. I haven't seen it work but I am sure that could be arranged for a serious buyer.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Pelican Sack Weighers

1 phase, choice of 2.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Walthambury Walthamatic 520

3 head pneumatically operated weigher. More commonly found on Grimme Allrounder Harvesters but this one is used in the grading shed environment to bag up oversize crop. Located Mid Lincs.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Agrimech Avensis Weigher

High output tank weigher with digital controls. 3 phase electrics requiring air supply as well. Located near Rugby, this machine was bought new but now the owner is concentrating on processing contracts. Always used in this shed since delivery, presents in tidy, unmolested condition. Has been used as part of a weigher, stitching and stacking system. The stitcher can be seen below (Agrimech V Track) and the Bijlsma Palletiser can be found by clicking here.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Agrimech V Track Stitching System

Agrimech V Track stitching system with DS9 double stitch head. Used in conjunction with the Avensis weigher. All in good working order and ready to work with weigher. Has been used as part of a weigher, stitching and stacking system. The weigher can be seen above (Agrimech Avensis) and the Bijlsma Palletiser can be found by clicking here​. Located near Rugby.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Bagging and Stacking System

Tong twin head electronic weighing, stitching and palletising system. Not used for a few years, hence the other material stacked close to it. That material is to be moved to create better access and the total package is to be recommissioned for sale. The equipment was in full use until the partners at the time decided to cease potato production. On my visit the system was turned on with all lights illuminating and the compressor generating air but as I was alone I wasn't confident to strike up equipment not 100% familiar to me. In the current form of installation it occupies a square corner in the shed 30ft x 30ft. Interested parties should liaise with me on the timescale for engineers to visit and recommission. 

For more information call Steve on: 07850 871901

Click on photos to enlarge

'The Full Monty' Bagging, Stitching and Stacking System With a Dual Position Robot

Just completed bagging from the 2025 crop which is annually 75 acres on this farm near Rugby. Maintained annually I saw this kit in full working order during my first visit in early Feb 2026.

For more information call Steve on: 07850 871901

Washers

Washers

Click on photos to enlarge

Haith 30 tonnes/hour Barrel Washer

Just finished with on this family farm in Cheshire. It easily loads a bulker in under an hour I am told. 3 phase electrics, no centre brush but good discharge belt and a straight machine. Ok it's got a bit of age but the tank's not rotting and it can go straight to work. Located in Cheshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Haith Mobile Barrel Washer

4 metres long with 1.2 metre diameter barrel, adjustable central brush for enhanced performance. Dependant on crop, 25 tonnes/hour. No longer required on this Mid Lincs site. Part pintle lined barrel, 3 phase electrics, spray bar output elevator.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Root Crop Washing kit

This Haith destoner precedes the Peal washer on this Co.Down (Nth Ireland) farm where carrots are no longer grown and processed. Whilst I have received these photos from my customer I have total trust these photos represent tidy serviceable equipment ready to be used by a new owner for whatever root crop is to be processed. It is my intention to visit and verify the quality.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Washer and Stone Trap

Washer and stone trap removed from grading line to make way for new kit. Located near Ormskirk. Whilst all in working order, I was advised by the owner the washer tank could do with some attention.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Peal Prowash and Stone Trap

Peal Prowash with matching stone trap. Located in Cheshire this combination has been used exclusively for processing contracts with capability to load bulkers in 40 - 45 mins. The Peal machine might look scabby but it's all in working order.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Sponge Drier

15 roller x 4ft wide 3 phase sponge drier. No longer required on this farm, whilst in working order a new owner might decide to recondition the sponge rollers. Located near Chesterfield.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Have a Washer for Sale?

If you have a washer that you wish to sell then please get in contact with Steve on the number below.

For more information call Steve on: 07850 871901

Brushers

Brushers

Click on photos to enlarge

Tong 8ft x 3ft Dry Brusher

An old machine, not viewed in the best condition but all in working order when looked at beyond the rubbish left on it! Good pintle rollers doing the work and metalwork all straight etc with 3 phase electrics. Located near Rugby, Warwickshire.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Tong 6ft x 3ft Dry Brusher

Basic machine with 3 phase electrics. To be removed from the shed and washed off making it more pleasing to the eye however not detracting from those excellent brushes. A good machine with more photos to come in the near future. Located in Somerset.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Peal Vari-Brusher

3ft wide, 6ft long with Vari-speed motor for brushes, adjustable legs and castors. This machine has the all important adjustable pressure brushes above. Located in Lancs it's ready to go with good brushes throughout and 3 phase eletrics.

For more information call Steve on: 07850 871901

Click on photos to enlarge

Have a Brusher for Sale?

If you have a brusher that you wish to sell then please get in contact with Steve on the number below.

For more information call Steve on: 07850 871901

Palletisers & Robots

Palletisers & Robots

Click on photos to enlarge

Bijlsma Hercules Palletiser

Now surplus to requirements on this Warwickshire farm near Rugby. A very tidy little used machine where the farm is now concentrating on bulk supply to the processing market. Owned from new, complete with the feed conveyors shown in the photos. This was a part of a Agrimech weighing, stitching and stacking system click here to view the Agrimech weigher and V Track stitcher. 

For more information call Steve on: 07850 871901

Click on photos to enlarge

Have a Palletiser or Robot for Sale?

If you have a palletiser or robot for sale then please get in contact with Steve on the number below.
 

For more information call Steve on: 07850 871901

Bijlsma Hercules

CONTACT US

Call or Email Us for any further information

Or you can fill in the form below and we will get back to you as soon as we can!

Thanks for submitting!

© 2024 by Steve Thorley Farm Services

bottom of page